Our services
CNC machining and programming services
Precision parts made to your drawing, and hands-on CNC support for your own workshop. Every machining job includes drawing review, tooling selection, first-off approval and in-process inspection.
Service 1 of 6
CNC turning
Accurate turned components from bar, tube or forgings, programmed and set by people who have spent years at the machine.
We turn parts on Fanuc-controlled CNC lathes, from one urgent replacement shaft to repeat production batches. Every job starts with a careful look at your drawing: tolerances, fits, threads and surface finish decide how we plan the operations, which tools we use and how we hold the part.
Before a batch runs we prove a first-off and measure it. Only when it is right do we continue, checking critical dimensions as we go.
What we do
- Shafts, pins, spindles and axles
- Bushes, sleeves, spacers and collars
- External and internal threads
- Bores, grooves, tapers and chamfers
- Facing, parting and second-side operations
Ideal for
- Breakdown and maintenance replacements
- Repeat production batches
- Engineering shops needing overflow capacity
Service 2 of 6
CNC milling
Milled features and prismatic parts, and the second operations that turn a turned blank into a finished component.
We mill flats, pockets, slots, keyways, profiles and hole patterns, and add milled features to turned parts so you get a finished component from one supplier. Tooling, feeds and speeds are chosen for the material and the finish you need, not just for speed.
What we do
- Faces, shoulders and steps
- Pockets, slots and keyways
- Drilled, reamed and tapped hole patterns
- Brackets, flanges, blocks and plates
- Spanner flats and cross-holes on turned parts
Ideal for
- Mounting brackets and flanges
- Machined blocks and manifolds
- Finishing turned parts in one place
Service 3 of 6
Hydraulic cylinder components
Our deepest specialisation: components for hydraulic cylinders, where a few hundredths of a millimetre decide whether a seal holds.
Our team has many years of experience producing precision components for hydraulic cylinder systems with strict tolerance requirements. We understand seal grooves, fits, thread forms and the surface finishes that keep cylinders leak-free.
Whether you are rebuilding a damaged cylinder or manufacturing new ones, we machine the parts to your drawing or to the dimensions taken from the original component.
What we do
- Piston rods and rod ends
- Pistons with seal and wear-ring grooves
- Glands and end caps
- Clevises, eyes and mounting parts
- Threaded and bored connections
Ideal for
- Hydraulic repair workshops
- Cylinder manufacturers needing capacity
- Plant and mining maintenance teams
Service 4 of 6
Fanuc CNC programming & optimisation
Clean, efficient Fanuc programs written from your drawings — and existing programs reworked to run faster and cut better.
We write G-code and ISO turning programs for Fanuc controls, and review the programs you already run. Better tool paths, the right tooling and properly matched feeds and speeds can shorten cycle times, extend tool life and reduce scrap.
Our lead programmer has a track record of reducing machine setup time by roughly 15–25% through improved programs and setup routines. Results on your machines depend on the part, the machine and the batch size, so we will tell you honestly what we expect before we start.
What we do
- New programs from drawings
- Review and optimisation of existing programs
- Tool selection, feeds and speeds
- Setup sheets and operator notes
- Advanced Fanuc turning cycles
Ideal for
- Workshops without a dedicated programmer
- Shops with a new or complex job to prove
- Jobs where cycle time or tool wear is hurting margins
Service 5 of 6
Machine setup & troubleshooting
When a machine is down, a job will not hold size or a new part needs proving, we come and sort it out.
We do full machine setups — work holding, tooling, offsets and program checks — and take the job through to an approved first-off. When production is stuck, we work through the problem methodically: program, tooling, setup or material, until the cause is found and fixed.
What we do
- Full machine setup and tool offsets
- First-off proving and inspection
- Fault-finding on program and machining problems
- Chatter, finish and size-holding issues
- Workflow advice to cut changeover time
Ideal for
- Breakdowns that are stopping production
- New jobs that need to be proven quickly
- Workshops short of an experienced setter
Service 6 of 6
Operator support & training
Hands-on coaching that helps your operators set up faster, make fewer mistakes and understand what the machine is doing.
We coach operators and setters on your own machines, with your own jobs. Training is practical and focused on the problems your team actually meets on the shop floor.
What we do
- Setup routines and work and tool offsets
- Reading and interpreting engineering drawings
- In-process measurement with verniers and micrometers
- Basic program edits and safe running
- Good shop-floor workflow habits
Ideal for
- New or junior operators
- Teams taking on more complex work
- Workshops wanting more independence on the machines
Questions
Frequently asked questions
What do you need from us to quote?
A drawing (PDF, DWG/DXF or a clear sketch with dimensions), the material, the quantity and when you need the parts. If you only have a worn or broken sample, send photos and tell us — we will advise whether we can work from it.
Do you take on one-off jobs or only production runs?
Both. We machine single replacement parts for breakdowns as well as repeat batches. For repeat work we keep the proven program and setup notes, so the next batch starts faster.
Which areas do you serve?
We are based in Kempton Park and work with clients across the East Rand and greater Gauteng, including Benoni, Boksburg, Germiston, Edenvale, Johannesburg, Midrand and Pretoria.
Can you help with our own CNC machines?
Yes. We write and optimise Fanuc programs, set up machines, prove first-offs, troubleshoot problems that are holding up production and coach your operators on the machine.
How do you make sure parts are right?
We review the drawing before we start, prove a first-off and measure it before running the batch, and keep checking critical dimensions with calibrated verniers and micrometers while the job runs.
What materials do you turn?
Typically mild and alloy steels, stainless steel, aluminium, brass and engineering plastics. Tell us the grade on your drawing and we will confirm when we quote.
Can you copy a part without a drawing?
Often, yes. Send photos and the sample details and we will tell you whether we can measure it and make it accurately.
Can you do both turning and milling on the same part?
Yes. Many of our jobs are turned first and then milled, so you deal with one team and one quote.
Do you hard-chrome or hone tubes?
Chrome plating and honing are specialist processes we do not do in-house. If your job needs them, tell us when you request a quote and we will discuss how to handle it.
Do you program controls other than Fanuc?
Fanuc is our specialisation and ISO-standard G-code is widely compatible. If your machine uses another control, tell us the make and model and we will let you know honestly whether we can help.
Do you work at our premises?
Setup and troubleshooting work is done on your machines, so yes. Tell us where you are and what is happening and we will arrange a time.
Is this accredited training?
No — this is practical, on-the-job coaching rather than a formal accredited course. We focus on skills your team can use the same day.
Got a drawing? Get a clear quote.
Send us your drawing, sketch or photos of the part. We will come back with price, lead time and any questions about the design.